Chemicals: PC Board Chemicals
  Toner Reactive Foil 8" x 15ft - Green  
TRF-GREEN-15
Toner Reactive Foils are very thin pigments on 1/2mil Mylar carrier. The foil is heat-transferred on top of a toner image and then ironed on. Used in the etching process for making printed circuit boards, this foil performs two very important functions. First, when transferred on top of the toner it seals the image to prevent etchant from permeating into the granular nature of toner which would normally result in pitting of the base metal. Secondly, its plastic "top coat" gives the toner extreme rigidity allowing you to directly rub a sponge full of etchant right over the copper surface without damaging the toner image. For use with TTS-10 Toner Transfer System.

  • 8" wide x 15ft long
 		TRF-GREEN-15 : Toner Reactive Foil 8
    

Additional Information
Download Catalog Page (PDF)

Accessories & Related Items
TTS-10   Toner Transfer Sheet, Pkg/10   Optional  
TRF-WHITE-15   Toner Reactive Foil 8" x 15ft - White   Optional  



Circuit-Test Electronics
All rights reserved. © 2008

www.circuittest.com
Monday, December 01, 2008
1:07:03 PM

Tel: (604) 482-5210
Specifications & prices subject 
to change without notice.