OSEPP™ Gyroscope Sensor Module
SKU: GYROS-01
OVERVIEWThe OSEPP Gyroscope Sensor Module is a 3-Axis gyroscope sensor. It utilizes the InvenSense MPU3050 Motion Processor Unit providing a full-scale range from +/- 250˚/s up to +/-2000˚/s of angular rate measurement while providing the highest robustness supporting 10 000 g of shock.The module uses the I²C interface for data communication. The I²C lines are packaged with the power and ground lines into a modular connector, which allows easy plug and play operation. There are two connectors on the module to enable daisy chaining of multiple I²C devices together.The OSEPP Gyroscope Sensor Module combined with the OSEPP Accelerometer Sensor Module can deliver a complete 6-axis sensor for full motion detection.HIGHLIGHTS • I²C Addresses (7-bit): 0×68, 0×69 • Form Factor: 23 mm x 36 mm • Power Consumption: 30.5 mW (Active); 0.025 mW (Sleep) • Connector Pin Definition: Pin 1: Power, Pin 2: I²C Data, Pin 3: Ground, Pin 4: I²C Clock
Features:
- Plug and play with OSEPP I²C Expansion Shield
- X-, Y-, Z- Axis angular rate gyros sensor
- Programmable angular rate sensors with full-scale-range of +/-250, 500, 1000, or 2000 ˚/s
- 16-bit ADC for digitizing sensor output, sample rate programmable from 8000 samples/sec down to 3.9 samples per second
- Supports I²C interfacing with 2 programmable 7-bit address of 0×68 or 0×69
- Provides pass-through connector to support daisy chaining of multiple sensors from the OSEPP Sensor Module family
- Provides 0.1” breakout points for power and I²C interface pins access
