OSEPP™ I²C Expansion Shield
SKU: I2CSHD-01
OVERVIEWThe OSEPP I²C Expansion Shield is an Arduino-Compatible daughter (extension) card. It provides easy interconnection with other I²C devices, such as the OSEPP Sensor Modules family. As well, it integrates an I²C switch that provides 4 additional isolated I²C buses to enable the use without collisions of multiple I²C devices with same I²C addresses. The main I²C bus and each of the 4 additional I²C bus are brought out to a robust latchable 4-pin connector that allow easy plug and play functionality.HIGHLIGHTS • I²C Addresses (7-bit): 0×70, 0×71, 0×72, 0×73, 0×74, 0×75, 0×76, 0×77 • Form Factor: 53.3 mm x 68.6 mm • Power Consumption: 0.1 mW • Connector Pin Definition: Pin 1: Power, Pin 2: I2C Data, Pin 3: Ground, Pin 4: I2C Clock
Features:
- 1-to-4 I²C switch to provide four isolated I²C buses
- Stackable with other Arduino and Arduino Compatible shields
- Provides pass through of all I/O as well as reset button and ICSP connector
- Three selectable address bits for I²C switch to allow stacking of up to eight Shields
- Supports boards with the Arduino Shield interface, such as (but not limited to):
Duemilanove; Uno; Pro; Bluetooth; Mega/Mega 2560
- Works with 3.3 V and 5 V boards
- Plug and play I²C connectors that provide I²C, power, and ground signals
